Radio_FahrzeugV2/Receiver/Receiver.ino

#include <RF24_config.h>
#include <RF24.h>
#include <printf.h>
#include <nRF24L01.h>

#include <SPI.h>
#include <RF24.h>
//TODO Füge alle möglichen bewegungen hinzu
//TODO Mache es möglich Motoren geschwindigkeit mit analog zu kontolieren
RF24 radio(7, 8); // (CE, CSN)

const byte address[6] = "1RF24";
struct dataStruct {
    int Xposition;
    int Yposition;
} myData;
void setup() {
  Serial.begin(9600);
  radio.begin();
  radio.setPALevel(RF24_PA_MAX);
  radio.setChannel(125);
  radio.openReadingPipe(0, address);
  radio.startListening();
  pinMode(2, OUTPUT);
  pinMode(3, OUTPUT);
  pinMode(4, OUTPUT);
  pinMode(5, OUTPUT);
  pinMode(A2, OUTPUT);
  pinMode(A3, OUTPUT);
  pinMode(A4, OUTPUT);
  pinMode(A5, OUTPUT);

}

void loop() {

  if (radio.available()) {
    radio.read( &myData, sizeof(myData) );
    Serial.print("Y Pos");
    Serial.println(myData.Yposition);
    Serial.print("X Pos");
    Serial.println(myData.Xposition);
    if (myData.Yposition >= 700) {
      digitalWrite(3, 1);
      digitalWrite(2, 0);
      digitalWrite(4, 0);
      digitalWrite(5, 1);
      digitalWrite(A3, 1);
      digitalWrite(A2, 0);
      digitalWrite(A4, 0);
      digitalWrite(A5, 1);
    }

    if (myData.Yposition <= 200) {
      digitalWrite(2, 1);
      digitalWrite(3, 0);
      digitalWrite(5, 0);
      digitalWrite(4, 1);
      digitalWrite(A2, 1);
      digitalWrite(A3, 0);
      digitalWrite(A5, 0);
      digitalWrite(A4, 1);
    }
    if (myData.Xposition >= 700){
      digitalWrite(3, 1);
      digitalWrite(2, 0);
      digitalWrite(4, 1);
      digitalWrite(5, 0);
      digitalWrite(A3, 1);
      digitalWrite(A2, 0);
      digitalWrite(A4, 1);
      digitalWrite(A5, 0);
    }
    if (myData.Xposition <= 200){
      digitalWrite(3, 0);
      digitalWrite(2, 1);
      digitalWrite(4, 0);
      digitalWrite(5, 1);
      digitalWrite(A3, 0);
      digitalWrite(A2, 1);
      digitalWrite(A4, 0);
      digitalWrite(A5, 1);
    }

    if (myData.Yposition>200 && myData.Yposition<700 && myData.Xposition>200 && myData.Xposition<700) {
      digitalWrite(2, 0);
      digitalWrite(3, 0);
      digitalWrite(4, 0);
      digitalWrite(5, 0);
      digitalWrite(A3, 0);
      digitalWrite(A2, 0);
      digitalWrite(A4, 0);
      digitalWrite(A5, 0);
    }
  }
  delay(10);
}